Taizhou Huangyan Jiushuai Industry Trade Co.,Ltd.

a-Cyanoacrylate adhesive series

JS Cyanoacrylate series reaches the level of the aboard, and it can replace the import goods already. The technical of the JS Cyanoacrylate series is endraughted from aboard and produced according to its quality standard very strictly. And now JS Cyanoacrylate series can complete with the same kind of the products at home and at abroad.

• Technical index:

Name	α -Cyanoacrylate adhesive series
Item	General type 'H'				General type 'F'			Fast harden type 'S'		Anti-bump type 'w'
	H502	H502A		H502B	F502C	F502D	F502E	S502F	S502G	W502H	W502I
viscosity mpa.s/25°C	<5	40-95		500- 700	1000- 1600	4500- 600	4500- 20000	< 5	40-90	4500- 6500	20000- 27000
Cure speed S≤	15	38		48	48	48	48	3	5	48	48
Cutting strength mpa ≥	10	10		10	12	12	12	8	10	14	15
temperature( °C)	-50---80 °C
Shelf life	One year				Ten months			Three months		Ten months
character	Low viscosity, Fast cure speed, Wide usage .		Mid-viscosity, good impact-resistance, use widely, easy to paint		High-viscosity, good padding, Flexible and aquosity-resistance			Low-viscosity, quickly harden time, wide usage and short shelf life		High-viscosity, good padding, good impact-resistance and aquosity-resistance.
application	Suitable for metal, rubber, leather, generic glass ,plastic and producing pipeline.					Suitable for Metal, rubber, wood, pottery and bowlder.		Suitable for Metal, paper, wood and difficult-to-bond plastic.		Suitable for Metal, wood, foam and muti-hole materials.
package	2g /3g per PE Bottle , aluminum pipe plastic card , aluminum and plastic composite , 8g/10g/20g/50g per PE bottle;1kg/5kg/50kg per PE bucket.					2g /3g per aluminum pipe plastic card ;20g/50g per PE bottle, 5kg/50kg per PE plastic bucket		10g , 15g , 20g per PE bottle , 20kg/PE bucket		1kg/5kg per PE bucket.

• Usage instruction

• Gelatinize: the surface of the material which is to be bonding must be clean and dry also it should be smooth. Then drop the glue, rubbing it a little to make the glue distribute equally. The thickness of the general type 'F' and the fast harden type 'S' should be lower than 0.1mm. Every drip can cover an area of 5-6cm2 , the quantity and the thickness of the gelatinize of the glue will be increased as the increase of the viscosity.

• The condition of the harden:

The adhesion will get tight in a few seconds, and the maximum strength can be obtained in 24 hours.

• Toxin and defend

It has the sharp odor but non-pollution, non-toxic. Pay attention to keep it in a well-ventilated area when use it.

• Storage

Keep in a dry, cool and sealing place. Avoid the sunshine. The shelf life is from 3 months to one year. Avoid touching by child and do not let it sprinkle on your eyes , skin and clothes.

previous page

next page

Adobe Flash Player?