| |
JC-13-1
Macromolecule resin, consist of 87% Vinyl Chloride and 13%Vinyl Acetate Copolymer. JC-13-1supplies good chemical resistance, solubility, lacquer film strength and thermoplastic balance and so on. Generally, JC-13-1 soluble in strong solution and thinner relatively such as ketone solution and fragrant hydrocarbon thinner (ratio 50/50%). Mainly used in maintain lacquer, plastic dope, ink, magcard adhesive, PU color plasm and color card, calcium plasm floor, micro-groove record and so on.
JC-13-2
Molecular weight resin, nearly consist of 87% Vinyl Chloride and13%Vinyl Acetate Copolymer. Comparing with JC-13-1, It has much good solubility in ketone resin and other solutions so that the tolerance to fragrant hydrocarbon thinner will be much good. At the constitute of the system of ketone solution and fragrant hydrocarbon thinner (35:65%), melt JC-13-2 can reach 25% solid resin solution. If you need higher solid content, JC-13-2 can replace JC-13-1.
JC-10
Tiptop macromolecule weight resin, consist of 90% Vinyl Chloride and 10% Vinyl Acetate, JC-10 usually soluble in strong ketone system, in order to supply solid content of 13%-17% resin solution. JC-10 used in extremity diligency and chemical resistance situation. Because of its wonderful draw and tear character, JC-10 can be properly used in peel off dope. JC-10 can also been used with JC-13-2 in order to increasing the solid content.
DATA SHEET
NO. |
INDEX |
JC-13 |
JC-10 |
1 |
Appearance |
White powder |
White powder |
2 |
content(%) |
VC87%VAC13% |
VC90%VAC10% |
3 |
Viscosity (VN) |
54±2 |
60± 2 |
4 |
Granularity (40mesh) |
100% |
100% |
5 |
Inspect proportion |
0.45-0.5 |
0.45-0.5 |
6 |
Volatilization(%) |
≤1% |
≤1% |
7 |
macula/100g |
≤20 |
≤20 |
8 |
dissolution(20%MEK TOLUENE solution) |
transparence |
transparence |
|
|
